MIG 500 SYN

Big 5 inch LCD display on both power source and wire feeder. NON-STOP OPERATION. 3-IN-1 MULTIFUNCTIONALITY. ADVANCED SYNERGISTIC CONTROL MODE. Welding process: MIG/MAG, MMA, TIG DC. Additional welding processes: MIG Pulse, TIG DC HF Pulse, TIG DC LIFT Pulse. Power supply voltage, V: 3x400. MIG/MAG welding current, A: 20 - 500. TIG welding current, A: 5 - 500.

 5 inch LCD CONTROL PANEL ON THE WIRE FEEDER

A separate external, all-wheel-drive, 4-roll wire feed mechanism is equipped with its own synergic control panel. 
The synergic welding control mode on the machine is ideal for field work, where the power source and wire feed mechanism are located remotely.

 WORK 24 HOURS NON-STOP

A 100% duty cycle at maximum current ensures uninterrupted, stable operation of the welding machine throughout the workday. 
This allows for continuous welding and time-consuming tasks, increasing speed and productivity.

 3-in-1 MULTIFUNCTIONALITY

The DLD MIG 500 SYN is a multifunctional welding machine that supports semiautomatic welding (MIG/MAG), manual arc welding (MMA), and argon arc welding (TIG). This model supports TIG DC HF Pulse and TIG DC LIFT Pulse TIG welding modes.

 ADVANCED SYNERGISTIC CONTROL MODE

Synergic mode saves time and ensures high-quality welds, even for beginners, as key parameters are automatically selected with the option for fine-tuning the welding process manually. Synergic control allows you to modify all welding parameters by adjusting just one.
The synergic control mode allows for quick and easy setup of the machine for any task. The advantages of synergic control include ease of setup even by unskilled personnel, quick setting of welding parameters, and guaranteed high-quality welds. Synergic control can be disabled for manual operation.

MIG 500 SYN welding process selection menu

When the machine is turned on, the main welding process selection menu opens. Rotate the encoder to select a welding process, then press the encoder to confirm the operation.

• MMA - manual arc welding with a coated electrode.
• TIG - argon arc welding with a non-consumable electrode.
•  Manual mode - manual adjustment of semiautomatic welding parameters (MIG/MAG).
•  Synergic mode - synergic control of semiautomatic welding parameters (MIG/MAG)
• Pulse Mode - pulsed MIG welding.
• Settings - accesses the internal settings menu: language selection, primary MIG welding parameter, and reset to factory settings.

MIG 500 SYN display

1. LCD screen.
2. Encoder:

• Press to select a welding process, parameter, function, or setting.
• Rotate to adjust the selected parameter, function, or setting.

3. Selection button:

• Torch trigger mode.
• Select weld material/wire diameter/shielding gas/torch polarity.

4. Settings menu entry button:

• Language: Russian, English, Chinese.
• Main settings: Welding current (A)/Feed speed (m/min).
• Reset to factory settings.

5. Save/Load button: Pressing this button allows you to save and recall configured welding mode parameters. The memory card has a capacity of 30 memory slots.
6. Back button: Returns you to the previous action.
7. Wire feed button: Feeds the wire into the welding gun.
8. Gas test button: Sets the required shielding gas flow rate.
Pressing this button opens the gas valve to adjust the gas flow rate.