MIG 500 DP LCD

Big 5 inch LCD display on both power source and wire feeder. NON-STOP OPERATION. 3-IN-1 MULTIFUNCTIONALITY. DOUBLE PULSE MODE. ADVANCED SYNERGISTIC CONTROL MODE. Welding process: MIG/MAG, MMA, TIG DC. Additional welding processes: MIG Pulse, MIG Double Pulse, TIG DC HF Pulse, TIG DC LIFT Pulse. Power supply voltage, V: 3x400. MIG/MAG welding current, A: 20 - 500. TIG welding current, A: 5 - 500.

The DLD MIG 500 DP LCD semiautomatic welding machine is a multifunctional semiautomatic welding machine from the flagship DLD line with synergic control, as well as a fully functional TIG (DC HF Pulse, DC LIFT Pulse) argon arc welding unit for welding low-carbon and stainless steel, aluminum, and copper alloys.

A separate 4-roll all-wheel drive feed mechanism with its own control panel, synchronized with the welding source, allows for work in installation conditions and in Hard-to-reach areas where the power source and feeder are located remotely. Synergic control allows for systematization of all welding parameters by adjusting just one. Pulse processes are ideal for welding stainless steel and aluminum alloys. The unit is equipped with a separate feeder, a liquid cooling unit, and a wheeled trolley with space for a gas cylinder. Applications: assembly and field work, construction sites, automotive repair, fabrication of various metal structures, and working with stainless steel and non-ferrous metals.

 5 inch LCD CONTROL PANEL ON THE WIRE FEEDER

A separate external, all-wheel-drive, 4-roll wire feed mechanism is equipped with its own synergic control panel. 
The synergic welding control mode on the machine is ideal for field work, where the power source and wire feed mechanism are located remotely.

 WORK 24 HOURS NON-STOP

A 100% duty cycle at maximum current ensures uninterrupted, stable operation of the welding machine throughout the workday. 
This allows for continuous welding and time-consuming tasks, increasing speed and productivity.

 3-in-1 MULTIFUNCTIONALITY

The DLD MIG 500 DP LCD is a multifunctional welding machine that supports semiautomatic welding (MIG/MAG), manual arc welding (MMA), and argon arc welding (TIG). This model supports TIG DC HF Pulse and TIG DC LIFT Pulse TIG welding modes.

 DOUBLE PULSE MODE

With double pulse, the wire feed speed varies during welding according to the set parameters. DOUBLE PULSE mode is ideal for welding stainless steel and aluminum (also due to the cleaning effect of fast switching edges), especially thin sheets, where it can achieve a quality level equal to TIG welding.
This will also increase productivity. In DOUBLE PULSE mode, you can adjust the pulse and pause current duration, allowing you to further control the weld appearance and reduce the heat-affected zone. 
Welding in DOUBLE PULSE mode simplifies the welding process of aluminum and its alloys, as well as stainless steels, ensuring a high level of joint reliability.

 ADVANCED SYNERGISTIC CONTROL MODE

Synergic mode saves time and ensures high-quality welds, even for beginners, as key parameters are automatically selected with the option for fine-tuning the welding process manually. Synergic control allows you to modify all welding parameters by adjusting just one.
The synergic control mode allows for quick and easy setup of the machine for any task. The advantages of synergic control include ease of setup even by unskilled personnel, quick setting of welding parameters, and guaranteed high-quality welds. Synergic control can be disabled for manual operation.

MIG 500 DP LCD welding process selection menu

When the machine is turned on, the main welding process selection menu opens. Rotate the encoder to select a welding process, then press the encoder to confirm the operation.

• MMA - manual arc welding with a coated electrode.
• TIG - argon arc welding with a non-consumable electrode.
•  Manual mode - manual adjustment of semiautomatic welding parameters (MIG/MAG).
•  Synergic mode - synergic control of semiautomatic welding parameters (MIG/MAG)
• Pulse Mode - pulsed MIG welding.
• Double Pulse - dual-pulse MIG welding.
• Settings - accesses the internal settings menu: language selection, primary MIG welding parameter, and reset to factory settings.

MIG 500 DP LCD display

1. LCD screen.
2. Encoder:

• Press to select a welding process, parameter, function, or setting.
• Rotate to adjust the selected parameter, function, or setting.

3. Selection button:

• Torch trigger mode.
• Select weld material/wire diameter/shielding gas/torch polarity.

4. Settings menu entry button:

• Language: Russian, English, Chinese.
• Main settings: Welding current (A)/Feed speed (m/min).
• Reset to factory settings.

5. Save/Load button: Pressing this button allows you to save and recall configured welding mode parameters. The memory card has a capacity of 30 memory slots.
6. Back button: Returns you to the previous action.
7. Wire feed button: Feeds the wire into the welding gun.
8. Gas test button: Sets the required shielding gas flow rate.
Pressing this button opens the gas valve to adjust the gas flow rate.

• double pulse mig
• DLD MIG welder
• GMAW
• DLD welding